QuickBooks error code 6000 83

QuickBooks Error Code 6000 83 | Best possible solutions to troubleshoot

Sometimes, it becomes imperative to classify the error into different categories especially for a complex accounting solution like QuickBooks. Various error codes are grouped and coded in specific ways and could be difficult to resolve. One such group is the error 6000 series that normally displays along with seven or eight-digit codes. Today, we are focusing on one such error code from the QuickBooks 6000 series i.e. QuickBooks Error 6000 83. In the following post, you will get to know the error in detail along with the generic steps involved in resolving it.

What is QuickBooks Error Code 6000 83?

QuickBooks Error Code 6000 83 might be encountered while creating a QuickBooks backup, opening the file stored on a Linux server, accessing the file stored on a windows server, or restoring the backup. This issue will not allow working on the company file due to which your business-related activities might get hampered. Hence you are recommended to resolve this issue immediately. This post may help you out in fixing the error 6000 83 QuickBooks.

Probable causes behind the occurrence of QuickBooks Error 6000 83

The following list contains all the probable causes that might be accountable for error 6000 83.

  1. If you are using -U.S Windows version for many years, then this issue may take place.
  2. Because of a damaged .qbw company file.
  3. Due to an incorrect File Extension or imperfect QuickBooks installation.
  4. A corrupted or damaged Company file may cause the error 6000 83 QuickBooks.
  5. While trying to convert the file over a network.
  6. If the file extension in the format of .qbm or .qbw.adr, this may give rise to an issue.

How you can get rid of QuickBooks Error 6000 83?

The error 6000 83 QuickBooks comes across at the time of running the company file that has been stored on a Windows server. Here, we are concluding all the essential solutions that will surely help you out throughout this post.

Solution 1: Edit Windows hosts file

  1. The first step is to close the QuickBooks software.
  2. Now, press the Windows + E keys all in all to open the Computer window.
  3. Click on the Windows Folder option in the local disk and choose the System32 folder tab.
  4. After that, click on the driver’s tab and go to the etc folder.
  5. Use Notepad to run the host file and validate the IP address of the server.
  6. Choose the Tab key and enter the server name.
  7. Finally, save the file and access QuickBooks with the company file.

Solution 2: Check the Internet Connection

Before proceeding, ensure that the Initord.conf file aligns the Linux Database Server Manager to verify the directory.

  1. The first step is to launch the QuickBooks Enterprise Solutions software again.
  2. After that, you have to ping the server by following these steps.
  3. Hold the Windows + R keys to launch the Run window.
  4. And then, type CMD and choose the Ok tab.
  5. Type the Ping or name of the Linux server in the command prompt.
  6. Lastly, click on the Enter tab.

Solution 3: Turn off hosting on all Workstations

  1. First of all, launch the QuickBooks Desktop.
  2. Choose the File option and click on the Utility tab.
  3. Now, go through the following steps.
  4. Stop Hosting Multi-User Access
  5. Click on the Yes option in the Stop hosting multi-user access.
  6. Choose Yes and make sure that the Company file is closed.
  7. Host Multi-User Access

Ensure that your system is not hosting the company file.

Solution 3: Use QuickBooks File Doctor Tool

  1. Primarily, you have to download the tool and save it on the desktop.
  2. After that, run the file doctor and it starts detecting the issue.
  3. Once the system gets free of error codes, launch the PC again and check whether the issue has been diagnosed.

Solution 4: Resolve issues associated with the file name and location

In our recommendation, you need not to select the lengthy paths and special characters for the company file and location.

Do’s: C:\Users\Fred\My Documents\QuickBooks data\Company Name.qbw

Don’ts: Business\Fred\Fred’s Documents\My Business $.Business

To restore a QuickBooks backup from a network location, you have to copy the file (restored) to the network location. The following steps will guide you in doing the same.

  1. First of all, go to the File menu and choose Open or Restore Company.
  2. Click on the Restore a backup copy option and choose the Next tab.
  3. Select the Local Backup and click on the Next option.
  4. Now, search for the backup QuickBooks file {Companyname}.qbb
  5. Launch the Open tab and click on Open and Restore a Company.
  6. Press Next.
  7. Lastly, eliminate the characters and spaces when the Save Company File screen prompts and click on Save.

Solution 5: Validating the QuickBooks File Extension

  1. First of all, click on the company file and press the F2 key to open the Product Information screen.
  2. Select the Location in the File Information field and copy it on the system notepad.
  3. After that, shut down QuickBooks on all workstations including the company files if you are utilizing the QuickBooks multi-user environment.
  4. And then, right-tap on the Windows or start option and select Explore.
  5. Choose the file location and right-tap on it to select Rename.
  6. Lastly, write down the company file name and click on Enter.
In Conclusion

Expectantly, you have found this post effective while getting rid of QuickBooks Error Code 6000 83. Considering all the possible causes due to which you are getting this issue, the aforementioned solutions are straightforward. If you are unable to find a proper way of dealing with the issue, contact our professionals to get hassle-free technical support. Our technicians may save you time and trouble in resolving the issue related to the software. So call us right now on QuickBooks Error Support Phone Number.

Leave a Reply